{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.
Range: AirMax Intake Systems
PIPERCROSS TURBO INLET UPGRADE FOR PK445 AIRMAX
The BMW S58 is an exceptionally capable twin-turbocharged engine, but the original turbo inlet elbows narrow as they approach the compressor inlets. As airflow demand rises, particularly on tuned vehicles, these reduced internal diameters and abrupt transitions can increase restriction and turbulence immediately before the turbochargers.
The Pipercross turbo inlet upgrade has been developed to complement the PK445 Airmax intake system by improving the final section of the induction path. Enlarged internal passages and smoother, flow-matched transitions help deliver air to each turbocharger with less disruption, allowing the complete intake system to work more effectively.
WHY UPGRADE THE OE TURBO INLETS?
The OE components provide dependable performance at standard output, but their restricted turbo-side openings can become a limiting factor as mass airflow increases.
The Pipercross turbo inlets provide a substantial increase in internal diameter compared with the OE components. On the right-hand side, the inlet increases from 73 mm ID to 81 mm ID—an 11.0% increase in diameter and a calculated 23.1% increase in cross-sectional area. On the left-hand side, the inlet increases from 62 mm ID to 81 mm ID—a 30.6% increase in diameter and a calculated 70.7% increase in cross-sectional area. Matching both Pipercross inlets at 81 mm ID creates a larger and more balanced airflow path into the two turbochargers.
Each turbo inlet is 3D printed from a premium engineering polymer selected for dependable performance in demanding under-bonnet conditions. The inlets are paired with a larger-bore, five-ply reinforced silicone hoses, expertly shaped to maximise the available engine-bay space while maintaining a minimum 5 mm clearance from surrounding engine components throughout the installation envelope.
The larger inlet passages are designed to increase airflow capacity into both turbochargers, reduce turbulence and inlet-side pressure losses, support improved turbo response, strengthen mid-range torque, maintain power at higher engine speeds and make better use of the airflow available from the Pipercross AirMax system.
KEY PRODUCT BENEFITS
• 81 mm ID on both turbo inlets, creating a larger and more balanced airflow path into the S58’s twin turbochargers
• Right-hand inlet increased from 73 mm to 81 mm ID—an 11.0% increase in diameter and a calculated 23.1% increase in cross-sectional area
• Left-hand inlet increased from 62 mm to 81 mm ID—a 30.6% increase in diameter and a calculated 70.7% increase in cross-sectional area
• Up to +58.1 hp and +120.3 Nm versus the OE intake configuration, demonstrating the maximum measured gains from the complete Pipercross AirMax intake and turbo inlet system across the tested engine-speed range
• The larger inlet cross-sectional area is designed to reduce the restriction and pressure loss associated with the smaller OE inlet passages
• Smoother, optimised transitions help reduce localised turbulence immediately before the compressor wheels
• Supports faster turbo response, stronger mid-range torque and improved high-rpm power retention
• Complements the Pipercross PK445 AirMax carbon intake by removing the final airflow bottleneck before the turbochargers
• Engineered for standard and tuned BMW S58-powered G8X applications
• 3D printed from a premium engineering polymer selected for excellent mechanical and thermal performance
• Larger-bore, five-ply reinforced silicone hoses maximise the available installation space while maintaining a minimum 5 mm clearance from surrounding engine components throughout the installation envelope
• Direct replacement design using the original installation locations, with secure sealing and OE-quality fitment
• No ECU calibration is required solely for installation of the full AirMax Intake and inlet upgrade
PROVEN DYNO PERFORMANCE
Testing compared three configurations on the same BMW G80 M3:
1. OE intake
2. Pipercross AirMax intake
3. Pipercross AirMax intake with upgraded turbo inlets
THE RESULT: MORE PERFORMANCE WHERE IT MATTERS
The turbo inlet upgrade delivers measurable gains beyond the Airmax intake alone.
At approximately 3,000 rpm, the inlet-equipped system produced up to 51.3 Nm more torque than the Airmax configuration. This result is consistent with reduced pre-compressor restriction as boost and airflow demand increase, supporting a stronger and more immediate mid-range response.
At 6,300 rpm, the inlet-equipped system recorded an additional 24.4 hp over the Airmax intake alone. This result is consistent with the upgraded inlets reducing restriction at higher engine speeds, where both turbochargers require greater air mass to sustain power.
Compared with the OE intake configuration, the complete Airmax intake and turbo inlet combination delivered gains of up to 58.1 hp and 120.3 Nm across the tested engine-speed range. A noticeable increase when driving at 3,000rpm in torque makes the car feel more urgent and alive earlier on.
PEAK PERFORMANCE SUMMARY
• 636.5 hp peak output
• 772.1 Nm peak torque
• Up to +58.1 hp versus the OE intake configuration
• Up to +120.3 Nm versus the OE intake configuration
• Up to +24.4 hp from the turbo inlet upgrade over Airmax alone
• Up to +51.3 Nm from the turbo inlet upgrade over Airmax alone
ENGINEERED AS A COMPLETE AIRFLOW SYSTEM
The greatest benefit is achieved when the turbo inlets are used with the Pipercross Airmax intake.
The Airmax system improves airflow through the filters, airbox lids and crossover pipe, while the upgraded turbo inlets are designed to address the final restriction before the compressor wheels.
Together, the components create a more consistent induction path with increased volume and smoother transitions from the airbox to the turbochargers.
This full system allows the S58 breathe more efficiently throughout the rev range rather than moving the airflow bottleneck further downstream.
IDEAL FOR
• Cars already fitted with the Pipercross PK445 AirMax intake
• Standard vehicles requiring improved response and induction efficiency
• Stage 1 and Stage 2 tuned vehicles with increased airflow demand
• Drivers seeking stronger mid-range torque and high-rpm power retention
• Road, fast-road and track applications
• Builds retaining the standard turbochargers or preparing for future performance upgrades
VEHICLE APPLICATIONS
Designed for BMW S58-powered G8X models, including:
• BMW G80 M3
• BMW G81 M3 Touring
• BMW G82 M4 Coupé
• BMW G83 M4 Convertible
• BMW G87 M2
IMPORTANT NOTE: Due to changes from BMW to allow for Euro-7 emissions compliance, PK445 / AMC445 and associated AirMax intake parts are NOT compatible with S58 equipped vehicles produced after June 2026 (drop in panel filters are still compatible). The primary change that affects fitment is that the turbo inlets are integrated into the turbo housing, therefore making it impossible to replace them. Please see the official release from BMW here regarding these changes.
TESTING NOTES
Performance figures were calculated from the supplied G80 M3 inlet dyno dataset, carried out at AReeve. Modifications to car were a stage 1 MMX PCM and the intake configurations. The dataset compares the OE intake, Pipercross Airmax and Pipercross Airmax-plus-inlet configurations across the engine-speed range.
Fits 18 vehicles:
UK Deliveries
UK Mainland: We are offering free standard shipping on all orders which may take 1-4 days. Alternatively, you can also choose a Next Day service for £7.85. We send all standard deliveries via Parcelforce and next day services can be either Parcelforce, DHL, FedEx or UPS. All services are fully tracked.
Do you ship aboard (outside the UK)?
Yes we do. To almost anywhere in the World but please be aware that shipping charges are often high when shipping anything bulky. Our overseas orders are usually shipped with DHL, FedEx or UPS so you can track your deliveries online. Deliveries to most European destinations usually take within 72 hours of despatch.
There are a few countries / regions we do not ship to:
For all customers outside of the UK, the prices on this website will have 20% UK VAT Tax removed at the point of checkout (once you've entered your billing and shipping addresses). However you will likely have to pay some form of Duties / VAT prior to delivery of your goods. You are responsible for paying those charges. Failure to do so will result in the goods being returned to us. As the shipper, we will be charged again by the carrier to return the goods. This amount will be deducted from any refund you may be due.
If you are unsure of the customs and duty charges, we recommend you should contact your local authorities ahead of placing your order.
We do our best to ensure our stock data is accurate on our website. If we're ordering parts to fulfil your order from other manufacturers or suppliers, there can be delays in them despatching goods which may affect the overall delivery time. We will endeavour to do our best to keep you informed if things don't go to plan. We estimate the likely despatch times when you're looking at each part number. If you require parts urgently, please call us on +44 (0)1823 690281 before ordering to confirm availability.
Thank you for purchasing products from Octane Distribution Ltd. We endeavour to offer the best quality products and aftersales care but if you do find yourself in the position where you would like to return goods, we are here to help.
We try our best to ensure correct product/vehicle listings but there are always exceptions to the rule and no cataloguing is 100% accurate. The best advice we can give is to visually check to see if any parts you have ordered fit BEFORE disassembling your vehicle. If you are unsure, please contact us for advice.
Products Incorrect / Damaged / Faulty
You must inform us of any damage or shortages within three working days of receipt. If items are missing from your order, it's most likely that they are on backorder and will be despatched when in stock. We are always happy to clarify this if you get in touch.
Products No Longer Required / Ordered by Mistake
You have 30 days to return unwanted items that are unused and in their original condition (including any packaging, tags and labels) with proof of purchase (i.e. a receipt or order confirmation email). Some exceptions may apply. You must always check with us first BEFORE returning the items and we will give you a returns number to help us with processing and identification. Items returned may be subjected to a restocking fee if the goods are damaged or show signs of having been used. You will be responsible for paying your own shipping costs for returning the items. Shipping costs are non-refundable and we would recommend using a tracked/insured courier service and we accept no liability for orders returned with no proof of delivery.
If you have any questions about returning goods, please contact us.
This one’s not in stock at the moment. Leave us your details and we’ll find out when it’s due and email you.
Leave your email and we’ll send you one message the moment this part is available again – from our own stock, a supplier, or as soon as it can be built from components.