{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.
Ford Ranger Raptor 3.0L V6 EcoBoost
The Pipercross Performance Intake System is a direct replacement for the factory airbox and intake plumbing on the Ford Ranger Raptor 3.0L V6 EcoBoost. Engineered for increased airflow, improved filtration, and enhanced intake efficiency, this system delivers measurable performance gains while maintaining OEM-level fitment and durability.
Designed, tested, and manufactured using advanced CAD and 3D scanning technology, the Pipercross intake optimizes airflow paths, reduces restriction, and ensures consistent performance in demanding conditions.
High-Volume Enclosed Heatshield System
Significantly larger, partitioned intake volume compared to the OEM closed airbox
Full-cover heatshield with integrated lid for effective heat isolation
Retains OEM cold air feed location for consistent intake temperatures
OE grommet and chassis hard-point mounting for factory-style fitment
Vibration-damping edge trim to isolate Pipercross and OEM components
Bespoke Pipercross Foam Filtration
Twin conical air filter design using market-leading Pipercross foam media
Increases filtration surface area by 36.09% over typical foam panel filters
Excellent dust-holding capacity with low airflow restriction
Designed for high-performance and off-road environments
Precision-Engineered Intake Tubing
CNC mandrel-bent, powder-coated aluminium intake pipes
Consistent internal diameters to eliminate OEM airflow-disrupting indents
CNC-machined intake air temperature (IAT) sensor provisions
Integrated mounting brackets for secure installation
Premium Hose & Hardware Package
Thick-walled, step-matched silicone couplers for optimal airflow and durability
Allows proper engine movement decoupling
Stainless steel hardware for long-term corrosion resistance
Performance VS OEM
Vehicle Fitment
Ford Ranger Raptor
3.0L V6 EcoBoost Engine
OEM INTAKE ASSESSMENT
The OEM intake system on the 3.0 V6 Ecoboost engine adequately supports the Raptor in most scenarios, when the engine is operating with OE programming. However, aftermarket engine tuning (even conservative tuning) increases boost (and subsequent turbocharger air demand) enough that the OE intake components begin to limit performance of the engine, even in typical driving scenarios.
The Pipercross engineering team identified the OE intake filtration media type/total surface area, OE airbox and the airbox-integrated plumbing as areas of potential system performance improvement. Filtration media/surface area was to be improved via custom straight walled, foam-based air filters produced in-house at Pipercross. The airbox and the respective plumbing were to be partially replaced with aluminium heatshield and hard pipe assemblies that utilise the OE fresh-air ducting, while isolating this fresh air from ambient engine heat. All Pipercross components were to be maximised (filter size, partitioned heatshield space, hard pipe/hose diameter) for the available engine volume, without compromising clearance standards required for the long-term durability of the kit.
CONICAL AIR FILTERS
The heart of the Pipercross intake kit are the Pipercross straight walled air filters. These filters feature Pipercross’ time-tested and proven air filter construction methods, to achieve the targeted airflow performance of the kit while maintaining the airflow headroom to support significant future tuning packages/hardware upgrades. The bespoke Pipercross foam mesh blend strikes the perfect balance between increased flow and air filtration, while the coated mesh and formed rubber neck bases draw from decades of successful in-house Pipercross filter manufacturing. The utilisation of larger surface area, straight walled filters (each dedicated to a single turbocharger to maintain the OE configuration) increase filtration surface area 36.09% over typical panel filter inserts, and feature 90mm (3.5”) inner diameter outlets. These filters serve as the foundation for the performance increase offered by the Pipercross intake kit.
HEATSHIELD
The Pipercross heatshield were painstakingly designed to maximise the shielded volume within the Ranger Raptors engine bay, thus maximising the performance of the Pipercross air filters. The heatshield is tailored to the upper and lower OE fresh-air ducting, shaping airflow from the OE feeds connected to the forward heat exchanger cavity. In addition to utilising the lower ducting, the Pipercross part fully shields the filters from ambient engine heat, with centre-facing dividing walls that run tight to the vehicle frame and arch. The Pipercross component is CNC laser cut from corrosion-resistant 2mm aluminium sheet and powder coated for additional corrosion resistance/aesthetic appeal. To improve protection further, a lid to fully encapsulate the filters was added. Designed to sit snuggly around the heatshield and body work and enclose the OE upper cold air inlet section. The heatshield makes use of the OE vibration-damping chassis mounts, while also adding several fixed mounting points (via additional bolt-on brackets) for stability and long-term kit durability. To further assure the long-term durability of the Pipercross part, hybrid EPDM edging trim is used to isolate the heatshields from direct contact with any other components to prevent any vibration-related part failures.
HARD PIPES
The Pipercross Ranger Raptor hard pipe assemblies compliment the benefits offered by the air filters and heatshield assemblies, rounding out the overall performance capabilities of the Pipercross kit. Both hard pipe assemblies are constructed of 90mm (3.5”) outer diameter aluminium tubing that has been CNC-mandrel-bent, for a consistent cross-sectional inner diameter throughout each assembly (vs. welded sections that can create flow-destabilizing internal swarf areas). Temperature sensor placement was also carefully considered on the pipe assembly, with a CNC-machined sensor boss placed in almost identical locations to the OE plumbing (to ensure consistent and accurate sensor readings with the Pipercross kit installed). Both assemblies also feature brackets designed to accept vibration-isolating mounts, to eliminate the potential of part failure due to long-term weld/tubing fatigue loading. Each assembly is powder coated to stringent specifications, for additional corrosion resistance and aesthetic appeal without any internal bore/boss overcoating.
DETAILS
The subtle details of the Pipercross Intake Kit are what elevate it beyond the competition. The silicone hose features a smooth internal bore, flow-matched coupling transitions and 5-ply wall construction; yielding just the right amount of compliance without any of the airflow destabilization associated with typical, unmatched silicone hose connections. The Pipercross heatshield utilises the lower OE vibration-damping airbox chassis mounts, in addition to fixed mounting points (via the bolt-on brackets) for part stability and trouble-free operation throughout the life of the vehicle. All stainless-steel hardware is provided to ensure corrosion, oil and other adverse engine bay environmental factors have no effect on the Pipercross kit’s function or aesthetic – no matter how hard the vehicle is driven.
RESEARCH AND DEVELOPMENT
All Pipercross products are designed in-house, utilising the latest 3D-printing, 3D-scanning, CAD, CFD, airflow testing and performance testing product development technologies. The Pipercross Ranger Raptor Intake Kit saw several design stages/iterations, to integrate the largest air filters, shielded engine bay volume, hard pipe assemblies and hose possible while maintaining required part clearances. Bench airflow testing was conducted on the full OEM intake system and multiple Pipercross prototype intake design iterations, using Pipercross’ in-house, custom designed and built airflow test apparatus inside a controlled environment.
AIRFLOW TESTING DATA
Both the OE and final Pipercross intake configurations were tested on Pipercross’ in-house, custom built stationary airflow test apparatus. To develop an initial airflow baseline, the OE intake system was tested, with the left-hand and right-hand plumbing connected via a custom 3D printed inlet to their maximum airflow values. The complete intake system (including the airbox and panel filter) up to the turbocharger was tested. Of note from this testing round was the maximum airflow value that the OE component could support at 824 CFM, however the restriction was high. Both the LH and RH side of the Pipercross intake were then tested in the same manner. The table and graphs below summarize the results of this testing, confirming the performance benefit of Pipercross intake components and their vastly increased airflow capabilities. Again, the maximum airflow values of the Pipercross components were notable, with the kit supporting up to 926 CFM (a 12.4% increase, respectively). What really separates the Pipercross intake from the OE is the reduction in airflow restriction. At 800CFM the OE airbox and piping saw 1670 mmWg of restriction, while the Pipercross kit only saw 500 mmWg (a 234% difference). With such dramatic changes in airflow and reductions in restriction, the Pipercross kit gives increased throttle response, turbo spool and power increases through the entire rpm range.
*Graphs depict the airflow based in restriction, the lower the line the less restriction.
FITTING INSTRUCTIONS
Fits 1 vehicle:
UK Deliveries
UK Mainland: We are offering free standard shipping on all orders which may take 1-4 days. Alternatively, you can also choose a Next Day service for £7.85. We send all standard deliveries via Parcelforce and next day services can be either Parcelforce, DHL, FedEx or UPS. All services are fully tracked.
Do you ship aboard (outside the UK)?
Yes we do. To almost anywhere in the World but please be aware that shipping charges are often high when shipping anything bulky. Our overseas orders are usually shipped with DHL, FedEx or UPS so you can track your deliveries online. Deliveries to most European destinations usually take within 72 hours of despatch.
There are a few countries / regions we do not ship to:
For all customers outside of the UK, the prices on this website will have 20% UK VAT Tax removed at the point of checkout (once you've entered your billing and shipping addresses). However you will likely have to pay some form of Duties / VAT prior to delivery of your goods. You are responsible for paying those charges. Failure to do so will result in the goods being returned to us. As the shipper, we will be charged again by the carrier to return the goods. This amount will be deducted from any refund you may be due.
If you are unsure of the customs and duty charges, we recommend you should contact your local authorities ahead of placing your order.
We do our best to ensure our stock data is accurate on our website. If we're ordering parts to fulfil your order from other manufacturers or suppliers, there can be delays in them despatching goods which may affect the overall delivery time. We will endeavour to do our best to keep you informed if things don't go to plan. We estimate the likely despatch times when you're looking at each part number. If you require parts urgently, please call us on +44 (0)1823 690281 before ordering to confirm availability.
Thank you for purchasing products from Octane Distribution Ltd. We endeavour to offer the best quality products and aftersales care but if you do find yourself in the position where you would like to return goods, we are here to help.
We try our best to ensure correct product/vehicle listings but there are always exceptions to the rule and no cataloguing is 100% accurate. The best advice we can give is to visually check to see if any parts you have ordered fit BEFORE disassembling your vehicle. If you are unsure, please contact us for advice.
Products Incorrect / Damaged / Faulty
You must inform us of any damage or shortages within three working days of receipt. If items are missing from your order, it's most likely that they are on backorder and will be despatched when in stock. We are always happy to clarify this if you get in touch.
Products No Longer Required / Ordered by Mistake
You have 30 days to return unwanted items that are unused and in their original condition (including any packaging, tags and labels) with proof of purchase (i.e. a receipt or order confirmation email). Some exceptions may apply. You must always check with us first BEFORE returning the items and we will give you a returns number to help us with processing and identification. Items returned may be subjected to a restocking fee if the goods are damaged or show signs of having been used. You will be responsible for paying your own shipping costs for returning the items. Shipping costs are non-refundable and we would recommend using a tracked/insured courier service and we accept no liability for orders returned with no proof of delivery.
If you have any questions about returning goods, please contact us.
This one’s not in stock at the moment. Leave us your details and we’ll find out when it’s due and email you.
Leave your email and we’ll send you one message the moment this part is available again – from our own stock, a supplier, or as soon as it can be built from components.