{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.
The PK457 Pipercross AirMax Carbon Fibre Intake System takes your Audi 4.0TT C8 RS6/RS7 to the next level. Meticulously designed carbon induction systems are tailored to your specific vehicle, providing a bespoke solution for maximizing power, efficiency, and induction sound.
Pipercross Audi C8 RS6/RS7 AirMax Intake System
The Pipercross AirMax Intake System has been designed and engineered to directly replace the OEM Audi intake airbox lid, air filter and turbocharger inlet hoses on the C8 RS6/RS7 with the 4.0TT engine.
KEY FEATURES
OEM INTAKE ASSESSMENT
The OEM intake system on the Audi 4.0TT engine (found in the C8 RS6/RS7 vehicles) showcases a suite of performance-focused design queues that have come to be expected from Audi’s RS level vehicles. These design aspects allow the OE intake system to properly support the 4.0TT engine’s airflow requirements in almost all situations, when the engine is operating with OE engine tuning/software. Conversely, this same OE system begins to demonstrate shortcomings when aftermarket engine tuning packages are applied – particularly given the significant performance potential of the 4.0TT engine with aftermarket tuning (and the resulting drastic increase in engine airflow demands).
The OE intake filtration medium, airbox outlet sizes and upper airbox internal volume were all identified by the Pipercross engineering team as potential opportunities for intake airflow improvements. However, the lower OE airbox half (and subsequent panel filter shape/size) as well as the OE turbocharger inlets were found to be sufficient for the notably increased airflow targets; based on OE RS-tier performance design efforts, specific part size/functionality and Pipercross engineers’ experience with overall performance intake design across a multitude of engines/chassis.
PLUS PANEL FILTER
Pipercross’ flagship panel filter; the Pipercross Plus, serves as the performance core of the C8 RS6/RS7 intake kit. This filter implements a hybrid, bespoke filtration foam stack-up to achieve the optimal balance between increased flow and air filtration. Additionally, the Plus filter range feature an industry-first, CNC-laser cut, 0.9mm thick aluminium backing frame that increases effective airflow 22.1% over typical steel mesh backing frames. The Plus filter was benchmarked against the OE pleated panel filter via airflow testing inside the complete OE intake system. During this testing, the Plus filter significantly outperformed the OE panel filter – reducing airflow restriction by an average of 38.66% (and a maximum of 47.47% at 200 CFM). As such, the Plus filter serves as the foundation around which the rest of the Pipercross AirMax kit is built, with all other intake components painstakingly designed to leverage this drastic increase in airflow performance.
AIRBOX LID
The Pipercross C8 RS6 AirMax Lid compliments the drastically increased airflow potential of the Plus panel filter. Utilising the latest 3D scanning and CAD technologies, the AirMax lid was thoughtfully designed to achieve more post-filter internal volume – maximising the available engine bay space below the bonnet without compromising OE fitment/clearance standards. Similarly, this same technology was employed to increase the outlet sizes of the lid, yielding a 61.39% increase in outlet internal cross-section vs. OE. Both geometric features were tied together utilising the latest CAD technology; integrating these features into the Pipercross part with flow-conducive geometry to aid in the formation of laminar intake flow and further increase flow throughput from within the AirMax system. All functional performance improvements are combined into a single carbon-fibre unit that adds a beautiful form-and-function aesthetic to any C8 RS6 engine bay.
OUTLET HOSES
The Pipercross RS6 AirMax outlet hoses supplement the performance advantages of the AirMax lid and Plus filter. In addition to accommodating the larger outlets, the Pipercross hoses also eliminate the flow-destabilising flex convolutions of the OE hoses (as well as some competitor hoses). These convolutions create large flow instabilities on the interior boundaries of the convolutions, resulting in a smaller effective cross-sectional internal area (and less air thru-flow, as such). Step-matched OE turbocharger inlet hose connections are also featured on the Pipercross hose, further stabilising internal airflow and maximising internal hose airflow area.
DETAILS
The subtle details and ancillary parts of the Pipercross AirMax Intake Kit are what elevate it to the level of a premium product. The AirMax Lid features an integrated aluminium baseplate bonded to the carbon lid. This bonded plate ensures a consistent airtight seal to the panel filter. Aluminium structures are bonded into the AirMax lid outlets to ensure long-term structural integrity of the outlets to combat repeated mechanical/thermal load conditions. All stainless-steel hardware is provided with the AirMax kit (as well as aluminium flared mounting standoffs) to ensure corrosion, oil and other adverse engine bay environmental factors have no effect on the Pipercross kit’s function or aesthetic – no matter how hard the vehicle is driven.
RESEARCH AND DEVELOPMENT
All Pipercross products are designed in-house, utilising the latest 3D-printing, 3D-scanning, CAD, CFD, airflow testing and performance testing product development technologies. Multiple stages of testing were conducted within Pipercross’ engineering department, to gauge the effectiveness and shortcomings of the OEM system, while confirming the increased performance of various iterations and stages of the Pipercross AirMax intake. Bench airflow testing was conducted on the full OEM intake system and multiple Pipercross prototype intake design iterations/configurations, using Pipercross’ in-house, custom designed and built airflow test apparatus inside a controlled environment. Performance testing of the OEM and final Pipercross intake design was completed at a third party, independent, environmentally regulated dynamometer cell to ensure unbiased, final performance gain data was captured.
AIRFLOW TESTING DATA
Three intake configurations were tested on Pipercross’ in-house, custom-built stationary airflow test apparatus. To develop an initial performance benchmark, the full OE intake system (complete OE airbox plus OE air filter and OE outlet hoses) were flow tested to maximum values. The Pipercross Plus filter was then installed in the OE system, to gauge the resulting airflow increase from only the Plus filter. Finally, the full AirMax intake system (installed on the OE lower airbox) was tested to gauge the effectiveness of the AirMax lid and outlet hoses. A 722CFM vs. 934CFM maximum airflow capability (Full OE vs. Full AirMax Intake) was recorded.
The table and graph below summarize the results of this testing and serves to confirm the performance benefit of both the PX Plus filter alone, as well as the supporting AirMax components in addition to the Plus filter. Of note is the performance gleaned from the AirMax components – which yield 43.23% maximum/42.69% average airflow restriction over the Plus filter alone.
PERFORMANCE TESTING DATA
Building upon the data gathered from Pipercross’ in-house airflow testing discussed above, the final configuration of the AirMax kit (utilising the Plus filter) was tested on an otherwise unmodified 2021 C8 Audi RS6 utilising a roller-based dynamometer inside a temperature-controlled environment, at an independent, third-party testing facility The vehicle was tested with both OE and aftermarket tuning applied, to gauge the performance effectiveness of the AirMax kit at different levels of vehicle modification. Three runs of each configuration were tested on the same day, within the same cell (six runs in total) and the vehicle was allowed to cool between testing sets.
The data graphed shows the average of three runs for each vehicle configuration tested. As demonstrated in these graphs, the AirMax kit provides meaningful performance benefits to a completely stock vehicle; but can significantly increase engine performance in conjunction with aftermarket engine tuning. Another performance benefit of the AirMax kit (not clearly demonstrated with the data graphed) is resistance to heat soak and resulting power loss.
When tested with OE tuning, both the OE and AirMax intake systems provided repeatable power figures across each of the three testing runs. Conversely, when aftermarket Stage 1 tuning was applied, the OE intake system consistently lost power on each testing run – indicating the OE intake is particularly vulnerable to the elevated engine bay temperatures of tuned vehicles, and the resulting power loss from exposure to those temperatures. However, the AirMax kit performed beautifully in these same conditions with the Stage 1 tuning applied, posting power and torque figures within +/- 3%, from the first to last dynamometer run. This can be attributed to the AirMax kit’s increased airflow capability/improved airflow dynamics (preventing internal air stagnation and subsequent heat soak) as well as the conductive heat resistance of the carbon fibre.
Stock tuning
Stage 1 Tuning
Note: Airbox base is not included in kit
Fits 4 vehicles:
UK Deliveries
UK Mainland: We are offering free standard shipping on all orders which may take 1-4 days. Alternatively, you can also choose a Next Day service for £7.85. We send all standard deliveries via Parcelforce and next day services can be either Parcelforce, DHL, FedEx or UPS. All services are fully tracked.
Do you ship aboard (outside the UK)?
Yes we do. To almost anywhere in the World but please be aware that shipping charges are often high when shipping anything bulky. Our overseas orders are usually shipped with DHL, FedEx or UPS so you can track your deliveries online. Deliveries to most European destinations usually take within 72 hours of despatch.
There are a few countries / regions we do not ship to:
For all customers outside of the UK, the prices on this website will have 20% UK VAT Tax removed at the point of checkout (once you've entered your billing and shipping addresses). However you will likely have to pay some form of Duties / VAT prior to delivery of your goods. You are responsible for paying those charges. Failure to do so will result in the goods being returned to us. As the shipper, we will be charged again by the carrier to return the goods. This amount will be deducted from any refund you may be due.
If you are unsure of the customs and duty charges, we recommend you should contact your local authorities ahead of placing your order.
We do our best to ensure our stock data is accurate on our website. If we're ordering parts to fulfil your order from other manufacturers or suppliers, there can be delays in them despatching goods which may affect the overall delivery time. We will endeavour to do our best to keep you informed if things don't go to plan. We estimate the likely despatch times when you're looking at each part number. If you require parts urgently, please call us on +44 (0)1823 690281 before ordering to confirm availability.
Thank you for purchasing products from Octane Distribution Ltd. We endeavour to offer the best quality products and aftersales care but if you do find yourself in the position where you would like to return goods, we are here to help.
We try our best to ensure correct product/vehicle listings but there are always exceptions to the rule and no cataloguing is 100% accurate. The best advice we can give is to visually check to see if any parts you have ordered fit BEFORE disassembling your vehicle. If you are unsure, please contact us for advice.
Products Incorrect / Damaged / Faulty
You must inform us of any damage or shortages within three working days of receipt. If items are missing from your order, it's most likely that they are on backorder and will be despatched when in stock. We are always happy to clarify this if you get in touch.
Products No Longer Required / Ordered by Mistake
You have 30 days to return unwanted items that are unused and in their original condition (including any packaging, tags and labels) with proof of purchase (i.e. a receipt or order confirmation email). Some exceptions may apply. You must always check with us first BEFORE returning the items and we will give you a returns number to help us with processing and identification. Items returned may be subjected to a restocking fee if the goods are damaged or show signs of having been used. You will be responsible for paying your own shipping costs for returning the items. Shipping costs are non-refundable and we would recommend using a tracked/insured courier service and we accept no liability for orders returned with no proof of delivery.
If you have any questions about returning goods, please contact us.
This one’s not in stock at the moment. Leave us your details and we’ll find out when it’s due and email you.
Leave your email and we’ll send you one message the moment this part is available again – from our own stock, a supplier, or as soon as it can be built from components.