Offer15% off every Milltek Sport exhaust until 30 November. No code needed.Shop now › OfferBlack Friday: 20% off every Probite brake disc and pad until 1 December. No code needed.Shop now › OfferBlack Friday: 30% off every Whiteline part until 9 December. No code needed.Shop now ›
Shopping for: VAUXHALL MOKKA 1.2 Hybrid
Menu

{{ flash }}
✓

Added to basket

{{ transferDone.added }} item moved into your basket.

{{ transferDone.skipped }} item skipped — no current price available.

Your {{ state.meta.labelSingular.toLowerCase() }} is still saved.

Save items to your {{ state.meta.labelSingular.toLowerCase() }}

{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}

{{ authError }}
{{ authError }}

Filter Parts

By Powerflex series:

By diagram reference:

PFR32-110

A Frame to Chassis Bush

PFR32-110

19mm

Road Series

In Stock
Est. despatch Same or next working day

2 Required Per Vehicle

Diagram reference 10

For pre-2010 Vehicles with 3/4" bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.A short video to help as a guide to remove bushes such as these can be found by clicking here.

PFR32-110-16

A Frame to Chassis Bush

PFR32-110-16

16mm

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 10

For post-2010 Vehicles with M16 bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.A short video to help as a guide to remove bushes such as these can be found by clicking here.

PFR32-110-16H

A Frame to Chassis Bush

PFR32-110-16H

16mm

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 10

For post-2010 vehicles with M16 bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.

PFR32-110H

A Frame to Chassis Bush

PFR32-110H

19mm

Heritage Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 10

For pre-2010 Vehicles with 3/4" bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.

PFF32-103-28

Front Anti Roll Bar Bush 28mm

PFF32-103-28

28mm

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 3

This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering.

PFF32-103-28H

Front Anti Roll Bar Bush 28mm

PFF32-103-28H

28mm

Heritage Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 3

This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering.

PF32-130-80

Front Bump Stop Extended - 80mm

PF32-130-80

80mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

PF32-130-80H

Front Bump Stop Extended - 80mm

PF32-130-80H

80mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

PF32-130-80H

Front Bump Stop Extended - 80mm

PF32-130-80H

80mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

PF32-130-40

Front Bump Stop Lowered - 40mm

PF32-130-40

40mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

PF32-130-40H

Front Bump Stop Lowered - 40mm

PF32-130-40H

40mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

PF32-130-40H

Front Bump Stop Lowered - 40mm

PF32-130-40H

40mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

PF32-130-60

Front Bump Stop Standard - 60mm

PF32-130-60

60mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

PF32-130-60H

Front Bump Stop Standard - 60mm

PF32-130-60H

60mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 30

This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

PF32-130-60H

Front Bump Stop Standard - 60mm

PF32-130-60H

60mm Tall

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

PFF32-108

Front Radius Arm Front Bush

PFF32-108

44mm

Road Series

In Stock
Est. despatch Same or next working day

4 Required Per Vehicle

Diagram reference 8

This part suits vehicles with the wider 44mm radius arms. For vehicles with 38mm radius arms please use PFF32-107. PFF32-108 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clicking here.

PFF32-108G25

Front Radius Arm Front Bush Caster Offset - 25mm Lift

PFF32-108G25

Road Series

Out of Stock
Contact for ETA

4 Required Per Vehicle

Diagram reference 8

PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 25mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steering The kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry. PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clicking here.

PFF32-108G50

Front Radius Arm Front Bush Caster Offset - 50mm Lift

PFF32-108G50

Road Series

Out of Stock
Contact for ETA

4 Required Per Vehicle

Diagram reference 8

PFF32-108G-50 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 50mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steering The kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry. PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clicking here.

PFF32-109

Front Radius Arm Rear Bush

PFF32-109

Road Series

In Stock
Est. despatch Same or next working day

2 Required Per Vehicle

Diagram reference 9

PFF32-109 replicates original steering geometry. Made from our Yellow 70A material, this part allows the required articulation that this bush location demands. To counter pull to the left or right, please use PFF32-109G05 for 0.5 degrees offset or PFF32-109G1 for 1 degree offset.

PFF32-109G

Front Radius Arm Rear Bush - Anti Pull

PFF32-109G

Road Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 9

PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting. Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.

PFF32-109GH

Front Radius Arm Rear Bush - Anti Pull

PFF32-109GH

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 9

PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting. Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.

PF32K-1003

Powerflex Handling Pack

PF32K-1003

Road Series

Out of Stock
Contact for ETA

1 Required Per Vehicle

Diagram reference

Included within this pack are the following parts: PFF32-301 Panhard Rod Bush 35mm PFF32-108 Front Radius Arm Front Bush PFF32-109 Front Radius Arm Rear Bush PFR32-110 A Frame to Chassis Bush PFR32-111 Rear Radius Arm Front Bush PFR32-112 Rear Radius Arm Rear Bush This Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.

PF32-130-80

Rear Bump Stop Extended - 80mm

PF32-130-80

80mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively.

PF32-130-40

Rear Bump Stop Lowered - 40mm

PF32-130-40

40mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively.

PF32-130-60

Rear Bump Stop Standard - 60mm

PF32-130-60

60mm Tall

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 31

This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively.

PFR32-111

Rear Radius Arm Front Bush

PFR32-111

Road Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 11

During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel. PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.

PFR32-111H

Rear Radius Arm Front Bush

PFR32-111H

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 11

During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel. PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.

PFR32-133

Rear Shock Absorber Upper Bush

PFR32-133

Road Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 33

PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

PFR32-133H

Rear Shock Absorber Upper Bush

PFR32-133H

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 33

PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

PFR32-112

Rear Trailing Arm to Axle Bush

PFR32-112

Road Series

In Stock
Est. despatch Same or next working day

2 Required Per Vehicle

Diagram reference 12

PFR32-112 uses our Black 95A material which helps to increase the stiffness of the original parts by 25%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clicking here.

PF32-132

Shock Absorber Bush

PF32-132

Road Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 32

Each carton contains 2 X bushes made up of 4 X PU parts. Early Defender models use 4 X bushes on the front and 2 X bushes at the rear. Defender models from 02 onwards use 4 X front bushes only. PF32-132 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

PF32-132H

Shock Absorber Bush

PF32-132H

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

2 Required Per Vehicle

Diagram reference 32

Each carton contains 2 X bushes made up of 4 X PU parts. Early Defender models use 4 X bushes on the front and 2 X bushes at the rear. Defender models from 02 onwards use 4 X front bushes only. PF32-132 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.

PFR32-134

Shock Absorber Lower Bush

PFR32-134

Road Series

Out of Stock
Contact for ETA

2 Required Per Vehicle

Diagram reference 34

PFR32-134 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material

PFF32-136

Steering Damper Bush - Pin End

PFF32-136

Road Series

In Stock with supplier
Est. despatch 48-72 hours

1 Required Per Vehicle

Diagram reference 36

This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135.

PFF32-136H

Steering Damper Bush - Pin End

PFF32-136H

Heritage Series

In Stock with supplier
Est. despatch 48-72 hours

1 Required Per Vehicle

Diagram reference 36

This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135.

Back to Top