{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. PFF5-270 vs. Plastic BMW OEM Clutch Pivot Pin:
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
The offset sleeve is designed to provide +/- 0.77 degrees of on-car adjustment of camber.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
The offset sleeve is designed to provide +/- 0.77 degrees of on-car adjustment of camber.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF5-1301GFX features CNC-machined aluminium outer shells with a fixed offset bore, which ensures wheel geometry is maintained during kerb strikes and under the extreme lateral forces generated by slick tyres and circuit racing. This is supplied with a Black 95A durometer bush with a knurled bore, increasing stiffness (+60%) and durability over the original equipment (OE) rubber bush. This combination results in minimal wishbone stiction and significantly reduced deflection. This bush increases negative camber by 0.75 , achieving reliable, grip-focused wheel geometry tested and approved by the Mini Challenge, perfectly complementing our PFF5-1302BLK / PFF5-1302GBLK Front Arm Rear Bush for those serious about track and race car builds, especially when combined with adjustable top mounts.
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
The original mounting bracket must be retained and reused when installing this part.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
The original mounting bracket must be retained and reused when installing this part.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF5-1302G is a CNC-machined mount with a polyurethane bush that provides approximately 1 degree of caster offset. This improves in-corner camber gain without compromising straight-line traction. Its knurled body retains grease and allows the bush to rotate freely, preventing torsional twisting of the bush material. This helps improve performance, reliability, and longevity. The original mounting bracket must be retained and reused when installing this part.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF5-1302G is a CNC-machined mount with a polyurethane bush that provides approximately 1 degree of caster offset. This improves in-corner camber gain without compromising straight-line traction. Its knurled body retains grease and allows the bush to rotate freely, preventing torsional twisting of the bush material. This helps improve performance, reliability, and longevity. The original mounting bracket must be retained and reused when installing this part.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF5-1322 Gearbox Mounting Bush Insert is made using Yellow 70A durometer material. It has been designed to fill the voids in the OE mount for an effective and affordable solution to stiffening the original rubber. It will not fit the GP3 or 22316886197 as fitted to some AWD models. As the vehicles age and simple upgrades seeing the 2-ltr turbo engine push power north of 250bhp, the OE rubber engine and transmission mounts are showing their age, with cracked rubber and excessive movement. PFF5-1322 Gearbox Mounting Bush Insert is made using Yellow 70A durometer material and has been designed to fill the voids in the OE mount for an effective and affordable solution to stiffening the original rubber.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF5-1322BLK Gearbox Mounting Bush Insert is made using Black 95A durometer material. It has been designed to fill the voids in the OE mount for an effective and affordable solution to stiffening the original rubber. It will not fit the GP3 or 22316886197 as fitted to some AWD models As the vehicles age and simple upgrades seeing the 2-ltr turbo engine push power north of 250bhp, the OE rubber engine and transmission mounts are showing their age, with cracked rubber and excessive movement. PFF5-1322BLK Gearbox Mounting Bush Insert is made using Black 95A durometer material and has been designed to fill the voids in the OE mount for an effective and affordable solution to stiffening the original rubber.
80mm Diameter
Road Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles: BMW 1 Series E81, E87, E88 (2004 - 2013) BMW 1 M E82 (2010 - 2012) BMW 1 Series F20, F21 (2011 - 2019) BMW 1 Series F40 (2018 on) BMW 1 Series F52 (2017 on) BMW 2 Series F22, F23 (2013 - 2020) BMW 2 Series Gran Coupe F44 (2019 on) BMW 2 Series Active Tourer F45, F46 (2014 - 2019) BMW M2 F87 (2015 on) BMW 3 Series E46 (1999 - 2006) BMW 3 Series E90, E91, E92, E93 (2005 - 2013) BMW 3 Series F30, F31, F34 (2011 - 2018) BMW M3 F80 (2011 - 2018) BMW 3 Series G20, G21, G28 (2018 on) BMW M3 G80 (2018 on) BMW 4 Series F32, F33, F36 (2013 - 2021) BMW M4 F82, F83 (2013 - 2021) BMW 4 Series G22, G23 (2020 on) BMW M4 G82, G83 (2020 on) BMW 5 Series E39 (1996 - 2004) BMW 5 Series E60, E61 (2003 - 2010) BMW 5 Series Gran Turismo F07 (2009 - 2016) BMW 5 Series F10, F11 (2010 - 2016) BMW 5 Series G30, G31 (2016 on) BMW M5 F90 (2017 on) BMW 6 Series E63, E64 (2003 - 2010) BMW 6 Series F06, F12, F13 (2011 - 2018) BMW 6 Series Gran Turismo G32 (2017 on) BMW 7 Series E38 (1994 - 2002) BMW 7 Series E65, E66, E67 (2001 - 2008) BMW 7 Series F01, F02, F03, F04 (2007 - 2016) BMW 7 Series G11, G12 (2015 on) BMW M8 F91, F92, F93 (2019 on) BMW 8 Series G14, G15, G16 (2018 on) BMW X1 E84 (2008 - 2015) BMW X1 F48 (2016 on) BMW X2 F39 (2017 on) BMW X3 E83 (2003 - 2010) BMW X3 F25 (2009 - 2017) BMW X3 F97, G01 (2017 on) BMW iX3 G08 (2020 on) BMW X4 F26 (2013 - 2018) BMW X4 F98, G02 (2018 on) BMW X5 E53 (1999 - 2006) BMW X5 E70 (2006 - 2013) BMW X5 F15, F85 (2013 - 2019)BMW X5 F85 M (2013 - 1018) BMW X5 F95, G05 (2018 on) BMW X6 E71, E72 (2007 - 2014) BMW X6 F16, F86 (2015 - 2019) BMW X6 F96, G06 (2019 on) BMW X7 G07 (2018 on) BMW Z4 E85, E86 (2003 - 2009) BMW Z4 E89 (2009 - 2018) BMW Z4 G29 (2018 on) Mini Hatch R50, R53 (2000 - 2006) Mini Hatch R56 (2006 - 2013) Mini Hatch F55, F56 (2014 - 2024) Mini Cabriolet R52 (2004 - 2008) Mini Cabriolet R57 (2009 - 2015) Mini Cabriolet F57 (2014 - 2024) Mini Clubman R55 (2007 - 2014) Mini Clubman F54 (2015 - 2024) Mini Countryman F60 (2017 - 2024) Mini Coupe R58 (2011 - 2015) Mini Roadster R59 (2012 - 2015) Rolls-Royce Ghost RR4 (2008 - 2018) Rolls-Royce Phantom RR1 (2003 - 2017) Rolls-Royce Phantom RR11, RR12 (2017 on) Rolls-Royce Wraith RR5 (2012 - 2018) Rolls-Royce Dawn RR6 (2015 - 2018) Rolls-Royce Cullinan RR31 (2017 on) Toyota Supra MK5 J29 (2019 on)
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Adding the insert will stiffen the bush further and potentially increase NVH, especially on diesel-engined vehicles.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened. This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Powerflex Handling Packs contain bushes that have been specifically selected to give the perfect combination of value versus performance based on years of experience. We have chosen products from our range to maximize the performance of the suspension, whilst being mindful of cost with a price saving over buying the parts individually. This can be an ideal upgrade complementing other suspension upgrades such as shock absorbers and springs. Each box includes a complimentary Powerflex keyring and sticker. Powerflex offer improved reliability over original parts and of course carry our Lifetime Warranty. Included within this pack are the following parts: PFF5-1301 Front Arm Front Bush PFF5-1302 Front Arm Rear Bush PFR5-1310 Rear Trailing Arm Front Bush PFF5-1320 Lower Engine Mount Large Bush This Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.
Road Series
Out of Stock
Contact for ETA
4 Required Per Vehicle
PFR5-1313 is made from our Black Series 95A material for ultimate chassis control. Replaces inner and outer positions on rear lower arms.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR5-1313 is made from our Black Series 95A material for ultimate chassis control. Replaces inner and outer positions on rear lower arms.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFR5-1311 is made from our Black Series 95A material for ultimate chassis control. Replaces inner position only on rear upper arms, the outer position is a spherical bearing.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFR5-1311 is made from our Black Series 95A material for ultimate chassis control. Replaces inner position only on rear upper arms, the outer position is a spherical bearing.
Road Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
PFF5-1321 Upper Engine Mount Insert are a simple, but effective rod design made from our Yellow 70A material. They fill the key voided areas of the mount to restrict engine roll, providing the perfect balance of compliance and rigidity, making them ideally suited for your daily driven vehicle. As the vehicles age and simple upgrades see the 2-ltr turbo engine push power north of 250bhp, the OE rubber engine and transmission mounts are showing their age, with cracked rubber and excessive movement. Designed to fit within the voiding of the original mount, these new inserts prolong the life of the OE mount by stiffening and limiting movement of the rubber. This results in a more settled transmission response during acceleration and deceleration, improving gear changes and reducing wheel-hop. The effective rod design is made from our Yellow 70A material. They fill the key voided areas of the mount to restrict engine roll, providing the perfect balance of compliance and rigidity, making them ideally suited for your daily-driven vehicle.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF5-1321BLK Upper Engine Mount Insert are a simple, but effective rod design made from our Black 95A material. They fill the key voided areas of the mount to restrict engine roll, providing the perfect balance of compliance and rigidity, making them ideally suited for your daily driven vehicle. As the vehicles age and simple upgrades see the 2-ltr turbo engine push power north of 250bhp, the OE rubber engine and transmission mounts are showing their age, with cracked rubber and excessive movement. The effective rod design is made from our Black 95A material. Designed to fit within the voiding of the original mount, these new inserts prolong the life of the OE mount by stiffening and limiting movement of the rubber. This results in a more settled transmission response during acceleration and deceleration, improving gear changes and reducing wheel-hop. They fill the key voided areas of the mount to restrict engine roll, providing the perfect balance of compliance and rigidity, making them ideally suited for your daily driven vehicle.