{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF60-8025P is a further 20% stiffer than PFF60-8025 being made solely in our Purple 80A durometer material and is recommended for more heavily tuned road or occasional track cars. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe. For an insert only use PFF60-820 (only fits pressed, rubber-coated OEM mount).
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF60-8025 is significantly stiffer than the OE mount and recommended for standard or mildly tuned road cars, using a combination of our Yellow 70A and Purple 80A durometer materials. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF60-8025BLK sees both bushes being made in our hardest Black 95A durometer material, providing the stiffest link between engine and chassis, for hard track and motorsport use.. An increase in NVH should be expected when fitting this part. For an insert only, use PFF60-820 (only fits pressed, rubber-coated OEM mount). Not suitable for diesels.
M14 x 70mm
Road + Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts?
M14 x 70mm
Road + Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts?