{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

70mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodised CNC-machined 6082-grade aluminium Jack Pads with a 95A durometer anti-slip base that fit into the four underbody lifting points on most modern Porsche vehicles including the classic 911. They are designed to help lift stability and location whilst protecting the underside of your vehicle from damage. To fit, locate the Jack Pad into the elongated factory lifting point, turn through 90 degrees and lock down securely using the plated Allen bolt with a standard 5mm Allen key. It's as simple as that!
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Supplied as an engine set of 6, our new PFR57-526K Engine Intake Sleeve Kit is made in our Dark Grey 80A polyurethane material for an OE aesthetic with increased durability and reliability over the equivalent rubber items which from what we have been told, are no longer available from Porsche! Each sleeve is designed and engineered to seal and link both sides of the intake system, with the supplied high-quality, stainless-steel hose clamps ensuring a tight fit and consistent engine vacuum, making them a must-have for any engine build. Please note, this kit fits 996 GT3 & 997 GT3 models only.
22.5mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
22.5mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
23.5mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
23.5mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
23mm
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
23mm
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
23mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
24mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
24mm
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF57-502G uses a Purple 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802G.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF57-502GBLK uses a Black 95A 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802GBLK.
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75 . For non-adjustable use PFF57-503.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75 . For non-adjustable use PFF57-503.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fits vehicles with a single gearbox bush in the end casing, including all 3.4 models, 3.6 & 3.8 Manual models except for Turbo GT2 & GT3 models. For vehicles with two bushes as part of a bracket, use PFR57-531. This part fits the following vehicles:Porsche 911 Anniversary Edition Coupe 3.6L H6 Chassis 996 (2004)Porsche 911 Carrera 4 Convertible 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera 4 Convertible 3.6L H6 Chassis 996 (2002-2004)Porsche 911 Carrera 4 Coupe 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera 4S Convertible 3.6L H6 Chassis 996 (2004-2005)Porsche 911 Carrera 4S Coupe 3.6L H6 Chassis 996 (2002-2005)Porsche 911 Carrera Convertible 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera Convertible 3.6L H6 Chassis 996 (2002-2005)Porsche 911 Carrera Coupe 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera Coupe 3.6L H6 Chassis 996 (2002-2005)
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fits vehicles with a single gearbox bush in the end casing, including all 3.4 models, 3.6 & 3.8 Manual models except for Turbo GT2 & GT3 models. For vehicles with two bushes as part of a bracket, use PFR57-531. This part fits the following vehicles:Porsche 911 Anniversary Edition Coupe 3.6L H6 Chassis 996 (2004)Porsche 911 Carrera 4 Convertible 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera 4 Convertible 3.6L H6 Chassis 996 (2002-2004)Porsche 911 Carrera 4 Coupe 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera 4S Convertible 3.6L H6 Chassis 996 (2004-2005)Porsche 911 Carrera 4S Coupe 3.6L H6 Chassis 996 (2002-2005)Porsche 911 Carrera Convertible 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera Convertible 3.6L H6 Chassis 996 (2002-2005)Porsche 911 Carrera Coupe 3.4L H6 Chassis 996 (1999-2001)Porsche 911 Carrera Coupe 3.6L H6 Chassis 996 (2002-2005)
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models, Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing, use PFR57-530. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission
Black Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models, Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing, use PFR57-530BLK. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission
73mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PF57-560 is a CNC aluminium jack pad that fits into the elongated lifting point on most modern Porsche vehicles, with a simple twist and lock action to locate securely. It is designed to help lift stability and location, whilst protecting the underside of your vehicle using high-strength 95A durometer polyurethane lifting pads, making this a must-have for Porsche owners and specialists alike.
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Not suitable for GT2 and GT3 models.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Not suitable for GT2 and GT3 models.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
Not suitable for GT2 and GT3 models.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
Not suitable for GT2 and GT3 models.
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
Black Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
19.5mm
Road Series
Out of Stock
Contact for ETA
4 Required Per Vehicle
PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509.
19.5mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
On some early 997 models (pre-2006) there is no support on the outside face of the link arm to hub bush. For these models use 4 x PFR57-508 for the link arm to hub bushes & 4 x PFR57-509 for the link arm to subframe bush. For hub carriers with support either side of the bush, use 8 x PFR57-509.
19.5mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR57-1508 fits 19.5mm width arms, for 22mm width arms please use PFR57-508.
19.5mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR57-1508 fits 19.5mm width arms, for 22mm width arms please use PFR57-508.
22mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR57-508 fits 22mm width arms, for 19.5mm width arms please use PFR57-1508.
22mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFR57-508 fits 22mm width arms, for 19.5mm width arms please use PFR57-1508.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty.
Road + Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product designed specifically for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty. This arm features suspension geometry tuning, with a caster increase of up to 0.4 and camber adjustment of +/- 0.75
Road + Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty. This arm features suspension geometry tuning, with a caster increase of up to 0.4 and camber adjustment of +/- 0.75