{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

22mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Check anti roll bar diameter before ordering.
22mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Check anti roll bar diameter before ordering.
22mm
Heritage Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Check anti roll bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
This part fits 172/182 & RS Sport models only
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
This part fits 172/182 & RS Sport models only
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration.
Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response.
Road Series
Out of Stock
Contact for ETA
4 Required Per Vehicle
PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF60-1020 Lower Engine Mount Insert is an affordable and easy to fit upgrade for the soft voided rubber mount, improving wheel hop, gear changes and throttle response. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF60-1020BLK Lower Engine Mount Insert is made using our Black Series 95A material for those who want no compromise, ultimate performance for the track or motorsport. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened. This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.