{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Made in our softer Red 65A material specifically for diesel automatic gearbox vehicles. For manual diesel cars use PFF66-221R. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Made in our softer Red 65A material specifically for diesel automatic gearbox vehicles. For manual diesel cars use PFF66-221R. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Made in our Yellow 70A material, this bush fits automatic petrol cars from 2000 onwards. For automatic diesel cars, use PFF66-222R. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Made in our Yellow 70A material, this bush fits automatic petrol cars from 2000 onwards. For automatic diesel cars, use PFF66-222R. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This bush fits manual gearbox cars from 2000 onwards.
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This bush fits manual gearbox cars from 2000 onwards.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
This bush fits manual gearbox cars from 2000 onwards.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This bush fits manual gearbox cars from 2000 onwards
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This bush fits manual gearbox cars from 2000 onwards.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This part will not fit OE part number 5232194 that has the bar going through it.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This part will not fit OE part number 5232194 that has the bar going through it.
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This part will not fit OE part number 5232194 that has the bar going through it.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 50% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY1998-MY2001 where all bushes are 38mm in diameter.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 50% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY2002-MY2010 where centre bushes are 40mm.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 100% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY2002-MY2010 where centre bushes are 40mm.
Heritage Series
Out of Stock
Contact for ETA
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 50% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY2002-MY2010 where centre bushes are 40mm.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 100% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY1998-MY2001 where all bushes are 38mm in diameter.
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
6 Required Per Vehicle
Over time, the front subframe bushes can soften and perish, leading to poor alignment, increased noise and a general lack of steering precision and handling performance. This new part is nearly 50% stiffer than a worn OE rubber bush, playing an important role in maintaining front subframe alignment. Fits models from MY1998-MY2001 where all bushes are 38mm in diameter.
52mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models.
52mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models.
52mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models.
62mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-205 is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush.
62mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-205BLK is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush.
62mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF66-205 is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush.
M12 x 60mm
Road + Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened. This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.
17mm
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFR66-211-17 fits Aero models only. Use PFR66-210-17 for non-Aero models.
17mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFR66-211-17BLK fits Aero models only. Use PFR66-210-17BLK for non-Aero models.
17mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFR66-211-17 fits Aero models only. Use PFR66-210-17 for non-Aero models.
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
EXH030 is designed to replace the original rubber bush that can become unbonded from the metal housing/bracket. Fits single or twin-mount brackets.
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
EXH030 is designed to replace the original rubber bush that can become unbonded from the metal housing/bracket. Fits single or twin-mount brackets.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
EXH030BLK is designed to replace the original rubber bush that can become unbonded from the metal housing/bracket. Fits single or twin-mount brackets.