{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fits 2.0 and 2.8L 4WD petrol models including VXR.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fits 2.0 and 2.8L 4WD petrol models including VXR.
26.6mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti roll bar diameter before ordering.
26.6mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti roll bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications.
Road Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Road Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Black Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.