{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

30mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
30mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
30mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201. Knurled end faces prevent sleeve rotation to retain suspension geometry. PFF85-201G boosts stiffness over the original part by 15%.
30mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201. Knurled end faces prevent sleeve rotation to retain suspension geometry. PFF85-201GBLK boosts stiffness over the original part by 15%.
60mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with our PFF85-201 Front Wishbone Front Bush to further improve your car's steering precision and braking response.
60mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with our PFF85-201BLK Front Wishbone Front Bush to further improve your car's steering precision and braking response.
65mm
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G.
65mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1823 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1822 Lower Engine Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1823R.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1823BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821BLK Upper Engine Mount Insert and PFF85-1822BLK Upper Engine Mount Insert.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1823R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1822R Upper Engine Mount Insert.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1822 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1823 Gearbox Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1821R. For 3 Cylinder & Diesel engines, please use PFF85-1822R.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1822BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821BLK Upper Engine Mount Insert and PFF85-1823BLK Gearbox Mount Insert.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1822R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1823R Gearbox Mount Insert.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1821 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822 Lower Engine Mount Insert and PFF85-1823 Gearbox Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1821R.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1821BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822BLK Lower Engine Mount Insert and PFF85-1823BLK Gearbox Mount Insert.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1821R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822R Lower Engine Mount Insert and PFF85-1823R Gearbox Mount Insert.