{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

18mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
18mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
20mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
20mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
22mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
22mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.
18mm
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Not suitable for VR6 models
18mm
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Not Suitable For VR6 Models
18mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Not suitable for VR6 models
20mm
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Not suitable for VR6 models
20mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Not suitable for VR6 models
20mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Not suitable for VR6 models
10mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models.
10mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models.
10mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Does not fit models with engine codes AMF 1.4 diesel engine or ANY & AYZ 3L TDI engines
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Does not fit models with engine codes AMF 1.4 diesel engine or ANY & AYZ 3L TDI engines
M12 x 60mm
Road + Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened. This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.