{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

18mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
18mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check anti-roll bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.
-10mm
Road Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430.
-10mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK.
-10mm
Heritage Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430H.
18mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldn t be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431.
30mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
30mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
30mm
Heritage Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
30mm
Heritage Series
In Stock
Est. despatch Same or next working day
2 Required Per Vehicle
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
30mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201. Knurled end faces prevent sleeve rotation to retain suspension geometry. PFF85-201GBLK boosts stiffness over the original part by 15%.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
Black Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923.
Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened. This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Fits all turbocharged models, and all post-2016 VW Up! Included within this pack are the following parts: PFF85-201 Front Arm Front Bush PFF85-1202 Front Arm Rear Bush PFR85-1910 Rear Beam Mounting Bush PFF85-1922 Lower Engine Mount InsertThis Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.