{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

Road Series
Out of Stock
Contact for ETA
1 Required Per Vehicle
This product may overheat if used too close to the catalyst. Please order the required amount for your vehicle, as some models will require more than others.
21mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
21mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
22mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
22mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
23mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
24mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
24mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
25.5mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
25.5mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF19-1202 will not fit models using aluminium front wishbones.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF19-1202 will not fit models using aluminium front wishbones.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
14mm bolt
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801.
14mm bolt
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801.
14mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt.
14mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt.
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFF19-1802G is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
Black Series
In Stock
Est. despatch Same or next working day
1 Required Per Vehicle
This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts.
20mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits Focus MK3 RS only. Please check anti roll bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits the following Rear Track Control Arms - Finis Code 1061666, 1064128,1150353, 1357319, 1548460, 1909108, 1743600, 1894048, 1894049, 1931272, 1931562, 1948762, 1949978 - Part number 98AG-5K652-BG, 98AG-5K652-AK, 1M5O-5K652-AA, 4M51-5K652-BD, 4M51-5K652-CB, 4M51-5K652-AF, BV61-5K652-GA, BV61-5K652-CH, BV61-5K652-AH, F1F1-5K652-AA, BV61-5K652-FF, BV61-5K652-EH, F1F1-5K652-CA, 1939321
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits the following Rear Track Control Arms - Finis Code 1061666, 1064128,1150353, 1357319, 1548460, 1909108, 1743600, 1894048, 1894049, 1931272, 1931562, 1948762, 1949978 - Part number 98AG-5K652-BG, 98AG-5K652-AK, 1M5O-5K652-AA, 4M51-5K652-BD, 4M51-5K652-CB, 4M51-5K652-AF, BV61-5K652-GA, BV61-5K652-CH, BV61-5K652-AH, F1F1-5K652-AA, BV61-5K652-FF, BV61-5K652-EH, F1F1-5K652-CA, 1939321
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Fits the following Rear Track Control Arms - Finis Code 1061666, 1064128,1150353, 1357319, 1548460, 1909108, 1743600, 1894048, 1894049, 1931272, 1931562, 1948762, 1949978 - Part number 98AG-5K652-BG, 98AG-5K652-AK, 1M5O-5K652-AA, 4M51-5K652-BD, 4M51-5K652-CB, 4M51-5K652-AF, BV61-5K652-GA, BV61-5K652-CH, BV61-5K652-AH, F1F1-5K652-AA, BV61-5K652-FF, BV61-5K652-EH, F1F1-5K652-CA, 1939321
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits the following Rear Track Control Arms - Finis Code 1061666, 1064128,1150353, 1357319, 1548460, 1909108, 1743600, 1894048, 1894049, 1931272, 1931562, 1948762, 1949978 - Part number 98AG-5K652-BG, 98AG-5K652-AK, 1M5O-5K652-AA, 4M51-5K652-BD, 4M51-5K652-CB, 4M51-5K652-AF, BV61-5K652-GA, BV61-5K652-CH, BV61-5K652-AH, F1F1-5K652-AA, BV61-5K652-FF, BV61-5K652-EH, F1F1-5K652-CA, 1939321
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFR19-812 provides stability to the rear trailing arm whilst allowing the knurled pattern bush to freely rotate in the supplied outer shell.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFR19-812 provides stability to the rear trailing arm whilst allowing the knurled pattern bush to freely rotate in the supplied outer shell.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
PFF19-810G is an adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degree of on-car camber adjustment.
Black Series
Out of Stock
Contact for ETA
4 Required Per Vehicle
PFF19-810G is an on-car adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degree of camber adjustment.