{{ state.meta.isTrade ? 'Sign in or register to build customer quotes you can reuse.' : 'Sign in or create an account to save items for later.' }}
This {{ state.meta.labelSingular.toLowerCase() }} is empty.
Browse the site and click "{{ state.meta.labelAdd }}" on any part.

22mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
22mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Please check bar diameter before ordering.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits steel wishbones only. The original rubber bush fails due to material degradation leading to problems such as imprecise steering, braking instability, and uneven tyre wear. Our two-piece polyurethane bush, PFF19-1902 Front Arm Rear Bush, resolves this, improving steering response, vehicle handling, and tyre longevity.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits steel wishbones only. The original rubber bush fails due to material degradation leading to problems such as imprecise steering, braking instability, and uneven tyre wear. Our two-piece polyurethane bush, PFF19-1902 Front Arm Rear Bush, resolves this, improving steering response, vehicle handling, and tyre longevity.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF88-1130 Lower Engine Mount Insert is made using our Yellow 70A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF88-1130BLK Lower Engine Mount Insert is made using our Black 95A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Increased NVH will be experienced by fitting this part.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function.
20.3mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing.
20.3mm
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Does not fit Mondeo 2.5, 2.3, or diesel models. Please check the anti-roll bar diameter size for correct product sizing.
21.3mm
Road Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing.
21.3
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing.
Road + Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
Fits both steel and aluminium Volvo arms
Road + Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
Fits both steel and aluminium Volvo arms
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solution to reducing excessive rear subframe movement. Both come supplied with a subframe alignment insert.
Black Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solution to reducing excessive rear subframe movement. Both come supplied with a subframe alignment insert.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
4 Required Per Vehicle
This part fits OEM part numbers 1426770, 31262930, 31262931.
Road Series
Out of Stock
Contact for ETA
2 Required Per Vehicle
PFR19-1917 Rear Trailing Arm Bush is a long-term solution to the commonly replaced original bush. Often split and torn, replacing the OE trailing arm bushes is labour-intensive and requires complex fitting tools, making it an expensive ordeal. Our bushes have been developed with dual material components and a moulded-in metal T-bracket making for a simpler fitment and cost-effective replacement. The left-hand bush on certain Volvo S60, S80, V60, V70, XC60, and XC70 models features a larger bracket with two additional threaded studs for an exhaust hanging bracket. The extra plate supplied retrofits to our original bush, making fitment across all vehicles possible.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
2 Required Per Vehicle
PFR19-1917 Rear Trailing Arm Bush is a long-term solution to the commonly replaced original bush. Often split and torn, replacing the OE trailing arm bushes is labour-intensive and requires complex fitting tools, making it an expensive ordeal. Our bushes have been developed with dual material components and a moulded-in metal T-bracket making for a simpler fitment and cost-effective replacement. The left-hand bush on certain Volvo S60, S80, V60, V70, XC60, and XC70 models features a larger bracket with two additional threaded studs for an exhaust hanging bracket. The extra plate supplied retrofits to our original bush, making fitment across all vehicles possible.
Road Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF88-1030 insert is made with our Yellow 70A material and fills the voids in the original mount, limiting engine movement and providing additional stability under acceleration. The result is a restriction in engine movement, preventing wheel hop and offering more precise gear-shifting for a more positive driving experience. This, in turn, additionally prolongs the mount s life expectancy. NB: When strengthening the connection between the engine and chassis, a small increase in NVH, usually at idle, should be expected. Naturally, the harder the material used, the greater the NVH transmitted. It will not fit vehicles using the engine bracket p/n 31401633 due to the lack of support provided by the bracket required to prevent the insert from pulling out of the torque rod.
Black Series
In Stock with supplier
Est. despatch 48-72 hours
1 Required Per Vehicle
PFF88-1030BLK insert is made with our Black 95A material and fills the voids in the original mount, limiting engine movement and providing additional stability under acceleration. The result is a restriction in engine movement, preventing wheel hop and offering more precise gear-shifting for a more positive driving experience. This, in turn, additionally prolongs the mount s life expectancy. NB: When strengthening the connection between the engine and chassis, a small increase in NVH, usually at idle, should be expected. Naturally, the harder the material used, the greater the NVH transmitted. It will not fit vehicles using the engine bracket p/n 31401633 due to the lack of support provided by the bracket required to prevent the insert from pulling out of the torque rod.